In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options
PSL extraction problem
bullshot
Member Posts: 14,342 ✭✭✭✭
I have a PSL and when I fire it the empty casing extracts only to the 90% angle from the center line of the barrel before the bolt closes thus "pinching" the casing just about in its center. Happens every shot so I've never been able to fire more than one round at a time before I have to open the bolt and remove the pinched casing.
What would cause this? Old grease in the bolt assembly?, something wrong with the extractor? It never fails to extract the empty but it won't throw it out before the bolt closes on it.
I'd appreciate any help you guys could offer. Thanks
What would cause this? Old grease in the bolt assembly?, something wrong with the extractor? It never fails to extract the empty but it won't throw it out before the bolt closes on it.
I'd appreciate any help you guys could offer. Thanks
"Just because you're paranoid doesn't mean they're not out to get you"
Comments
B. 'WEAK' AMMO
C. NO/BROKEN EJECTOR
Ejector = Ejects fired case out the ejection port