In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
excam tanfoglio ta22
jethro75
Member Posts: 67 ✭✭
just got in a "bag-o-gun" I put the thing back together but there seems to be a broken pin or something missing. Does the cylinder stop or "bolt" ride on a pin on the hand or a pin on the hammer. there is a pin sticking out the side of the hammer that looks like it is cut on an angle, doesn't look broken. the pin for the hand doesn't stick through hammer far enough for bolt to ride on. any thoughts? any pictures or diagrams? thanks.
Comments
One more thought. There is a spring inside the receiver on the loading gate assembly. It's the one that prevents the hammer from going to full cock while gate is open. Obviously in a spot that can collect gunk. And needs to be cleaned periodically. You have to remove the loading gate to clean. If it gets gunked up, it can prevent proper operation.