In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Scot Powder Co Brigadier 4065 308 Loads

je2140je2140 Member Posts: 225 ✭✭
edited April 2019 in Perry Shooter Competition Shooting and Reloading Forum
I've got a can of Scot Powder Co Brigadier 4065 which should work good in 308 but can't find any loading data for 147FMJ, does anybody have any experience with it in 308?
Thanks
JR
· Share on FacebookShare on Twitter

Comments

  • charliemeyer007charliemeyer007 Member Posts: 6,572 ✭✭✭
    edited November -1
    The 4065 (74) appears right below (slower) IMR 4064 (73) in the burn rate chart. If you can't find exact data the following should be a good guide line to consider.

    The Hodgdon online data for a 150 gr Nos BT list IMR 4064 starting load as 43.0 gr 2663 FPS 44,700 PSI; Max 47.7 gr Comp 2903 57,100 PSI
    the 150 gr Nos E Tip starting IMR 4064 as 42.9 gr 2659 FPS 47,500 PSI; Max 46.7 gr C 2883 FPS 59,800 PSI
    · Share on FacebookShare on Twitter
  • MIKE WISKEYMIKE WISKEY Member Posts: 10,035 ✭✭✭✭
    edited November -1
    right from the 'horse's mouth (scott reloading manual 1st addition, rev. 1) 150 gn fmj (same/same 147 gn) 42.0 gns to 46.0 gns
    QPI9qPal.jpg
    · Share on FacebookShare on Twitter
Sign In or Register to comment.