Dented cases

ChetStafford

I have some cases slightly dented just below the shoulder[:(!] Are they o.k. to use? guess I got to much lube on them. or maybe i had the die set up wrong? but 16 out of 20 came out with no dents or anything. thanks

PJ

Too much lube on the shoulder. Not a problem, the dents will come out on the first firing.
Pete

bgjohn

50,000 psi will straighten them right out.
JM[;)]

mrbruce

That would depend on how hot they were loaded.
The same amout of powder in a smaller place is not a good thing.
Don't expect them to go in the same place the ones without dent's went......

JustC

fire em straight, and use LESS lube next time.

dcloco

Try some Imperial sizing wax or Hornady sizing wax...both work excellent.

Have tried the roll on pad & OneShot....but did not like either.

Simply touch either of the waxes mentioned, twirl the case, and you are done.

ChetStafford

Thanks guys I figured that they would straighten out when fired but it never hurts to ask[;)]