In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

What equpment should I get next????

bpostbpost Member Posts: 32,669 ✭✭✭✭
So far I have been lucky. Shooting a used Bullberry barrel in 6BR on my Encore I have gotten in the low 2's with Berger 80 grain bullets and Varget. My new project is still in the works. An XP 100 action reworked Remington trigger 6BR 8 twist heavy barrel 269 neck.

This is my equipment list;
RCBS BIG MAX reloading press
Redding neck bushing sizing die with the correct bushing.
Redding FL size die ans standard bullet seater
RCBS 1500 Dispenser/scale Combo
RCBS priming tools
K&M neck turning gear with carbide cutters and doughnut removal cutters.

If there was a list of equipment I could get to help improve accuracy what would you get.

Comments

  • HighballHighball Member Posts: 15,755
    edited November -1
    You might pick up a concentricity gauge...Several out there. The idea being to place the cartidge in 'v' blocks with a dial indicator..turning the case allows you to check bullet run-out, ect...
    The Encore/Contendor allows one to sat the bullet into the lands...which mitigates somewhat the out of alignment problem, of course.

    Course..there is a Junke bullet spinner....[:D]

    You are shooting better then most already...perhaps it is time to relax and enjoy it ?
  • JustCJustC Member Posts: 16,056 ✭✭✭
    edited November -1
    Sinclair neck thickness micrometer
    K&M arbor press and wilson dies in 6BR or have a set of the Newlon Precision blanks cut with your chamber reamer.
Sign In or Register to comment.