In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options

300Win Match Loads

ContacFrontContacFront Member Posts: 1,113 ✭✭✭✭✭
edited April 2005 in Perry Shooter Competition Shooting and Reloading Forum
OK boys,

I pick up my baby this Tuesday from the FFL. Anyone got some good loads they are using for long range shooting out there? Needs to get out to 1K with the most accuracy I can get.

190s SMK or 200 SMK. Got 5lbs of RL22 handy. Have Federal 210 and 215 Match primers.
· Share on FacebookShare on Twitter

Comments

  • Options
    gunnut505gunnut505 Member Posts: 10,290 ✭
    edited November -1
    These are loads I shoot in my RugerM77MKII and TRGs for "Palma Matches" out to 1000M, but you should work them up slowly and reduce charges at LEAST 10% to start with; some guns won't like them.

    Fed Gold Medal brass trimmed to 2.615", flash hole reamed, case mouth deburred
    Hornady #3080 190gr Boattail HP Match bullet
    74.2gr RL-22
    CCI LRM primers seated flush to pocket bottom
    Cartridge OAL of 3.350" -just touches on TRGs, small jump on Ruger.

    Same brass/primer to same specs
    Speer 190 Match BT
    74.2 IMR 4831
    COAL of 3.345" -longer nose of bullet gives similar jump as H'dy bullet above

    Same brass, WLRM primer
    Nosler Partition 200gr
    69.4 RL-22
    3.340" COAL

    These work really well for me at 800-1200m
    Good luck!

    "Qui non est hodie cras minus aptus erit" --OVID
    · Share on FacebookShare on Twitter
Sign In or Register to comment.