In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Hornady/StoneyPoint OAL Gauge
konamtbiker
Member Posts: 284 ✭✭✭
I have a Stoneypoint OAL Gauge. They do not make a 25-06 Ackley Improved case for this tool. So i need to take one of my fired cases and Drill and Tap it so it will fit on my OAL gauge. Question is...Does anyone now what Thread per inch it is, and the diameter? I think i need a 5/16-36 Tap. Any help will be appriciated. Thanks in advance!
Comments
Just costs a few more bucks than the "stock" ones.
That's what you need. You may need to get one at a machine shop like I did. Or send for one.
Or, what I've done in the past is use the parent case. Just remember it's .004" longer than the Ackley. So you should subtract the .004" after you take your OAL measurement.
Since you're in gunsmithing school, I'd buy the tap and have at it. You'll never have to wait on anyone for a comparator case again and it is infinitely cheaper to be able to make your own on demand.
If you end up with your own shop you'll find yourself less satisfied with what's available in the marketplace and end up making a lot of your own tools and fixtures. This is a good start.
Best.
Which drill size did you use?
A 19/64th. came with the tap as a set.