In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
223 WSSM Loads?
williamsagconsulting
Member Posts: 12 ✭✭
Just purchased a Winchester mod 70 223 WSSM Feather weight Synthetic. I was not pleased with factory ammo in the factory rifle. After glass bedding and trigger job i have had some better accuracy sucess but think it can be better. Does any one know any load data for this cal. besides the typical stuff published everywhere. My real question is does anyone have any advice for 1.bullet gr weight,
2. Powder suggestions
3. Load charges
4.Primers?
Notice: I have also read of some problems loading over 4200 fps. in that the low density of the 22 caliber jackets actually disintegrates after exiting the mussel because of extreme RPM supposily over 300,000 rpm.
Any help would be appreciated WAC
2. Powder suggestions
3. Load charges
4.Primers?
Notice: I have also read of some problems loading over 4200 fps. in that the low density of the 22 caliber jackets actually disintegrates after exiting the mussel because of extreme RPM supposily over 300,000 rpm.
Any help would be appreciated WAC
Comments
This is a link to the load data from the cache website WSSM Zone:
223 WSSM load data
Best.
Winchester large rifle primers
federal case
48.0 gr. H380
Nosler 40gr ballistic tip
OAL 2.200
This load in my Browning Abolt 22" barrel chronographed at 3920 and shot 1/2" groups @ 100yds
as far as suggested powders
benchmark- with lite bullets
H380
blc-2
Varget
H414
IMR 4064
I have also used Fed 215 magnum primers
Take a look at this article
http://www.chuckhawks.com/223wssm.htm