In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

load for S&W 1955 target (45 ACP) ?

Joe DreesJoe Drees Member Posts: 2,953 ✭✭✭✭✭
I'm in the process of getting a 1955 S&W target in 45 acp. I'm going to use it for bulls-eye shooting (revolver class) and was wondering what a good ballpark load would be. TIA...Joe

joe

Comments

  • 1911a1-fan1911a1-fan Member Posts: 51,193 ✭✭
    edited November -1
    the guys i know who use revolvers in compititon{.45} all swear by 200 grain bullets and use vihtavuori

    5.5 grains n320

    reloaderror.jpg
  • bobskibobski Member Posts: 17,866 ✭✭✭
    edited November -1
    lead or jacketed?
    45 ACP or 45 auto rim?

    former air operations officer SEAL Delivery Vehicle Team 2. former navy skeet team, former navy rifle/pistol team member. co-owner skeetmaster tubes inc.. owner/operator professional shooting instruction. NRA certified instructor.
    Retired Naval Aviation
    Former Member U.S. Navy Shooting Team
    Former NSSA All American
    Navy Distinguished Pistol Shot
    MO, CT, VA.
  • Joe DreesJoe Drees Member Posts: 2,953 ✭✭✭✭✭
    edited November -1
  • bobskibobski Member Posts: 17,866 ✭✭✭
    edited November -1
    ACP or auto rim?
    Retired Naval Aviation
    Former Member U.S. Navy Shooting Team
    Former NSSA All American
    Navy Distinguished Pistol Shot
    MO, CT, VA.
  • ZinderblocZinderbloc Member Posts: 925 ✭✭✭✭
    edited November -1
    4.5 grs. of 231 with a 200 gr. SWC is an easy-shooting load.

    With the price of .45 ACP brass a fraction the cost of .45 Auto rim brass, I go with the ACP every time. Full-moon clips are cheap and reusable.
  • PinheadPinhead Member Posts: 1,485 ✭✭✭✭✭
    edited November -1
    I never shot bullseye matches but did use a S&W Model 25-2 and a Colt 1911 Series 70 in .45acp for pin shooting and combat matches. For both I used 200 grain lead SWC bullets in front of 5.2 grains of W231 powder and a Federal large pistol primer, usually WCC brass but did use some R-P also. The AOL was adjusted to the pistol or revolver that I was using(1.240" for the 1911 and 1.260" for the Revolver). If I had shot the bullseye matches I probably would have backed off the powder charge by 1/2 grain or so. Power is not what is needed in bullseye shooting. The above loads would shoot 1 ragged hole at 25yards in both and that is why I relied on one charge for both. They also had enough power to take a bowling pin off the table with authority.
  • perry shooterperry shooter Member Posts: 17,105 ✭✭✭
    edited November -1
    Hello I have shot bulls-eye for about 40 years and the 2 loads that come to mine are 185Gn star swaged lead with 4.3-4.5 gn of bulls-eye or 200 gn star with 4.2 -4.5 gn. bulls-eye the other load many people use for 50 yards is 4.1 of vit. 310 and a nosler 185 Gn jacketed hollowpoint . With a revolver you can go much lower in charge weight as the gun does not need to recoil to function However if you use a ransom rest you will find todays bulls-eye is not as hot as years ago and light loads don't shoot as small groups ."PRAISE THE HARDBALL GUN"
  • dfletcherdfletcher Member Posts: 8,175 ✭✭✭
    edited November -1
    Try the 200gr swc from LaserCast. Win 231 or VV work well, every gun is different.
    I prefer Auto Rim over the ACP with clips.

    dsf
  • bpostbpost Member Posts: 32,669 ✭✭✭✭
    edited November -1
    quote:Originally posted by Zinderbloc
    4.5 grs. of 231 with a 200 gr. SWC is an easy-shooting load.

    With the price of .45 ACP brass a fraction the cost of .45 Auto rim brass, I go with the ACP every time. Full-moon clips are cheap and reusable.


    I second this load, it is a tack driver in my S&W 25-2.

    Perry Shooter has won more matches than most people ever shoot in. It would be a good idea to try his Vit. 310 loads. I've not shot them so they may be better than anything posted so far and well worth the effort.
Sign In or Register to comment.