In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

lee shell holder

brickmaster1248brickmaster1248 Member Posts: 3,344
edited March 2008 in Perry Shooter Competition Shooting and Reloading Forum
will Lee shell holders work in my rcbs press and my rcbs priming tool?
· Share on FacebookShare on Twitter

Comments

  • peppersacpeppersac Member Posts: 90 ✭✭
    edited November -1
    Yes they should.
    · Share on FacebookShare on Twitter
  • brickmaster1248brickmaster1248 Member Posts: 3,344
    edited November -1
    are you sure? ineed someone who has already used them to know for surequote:Originally posted by peppersac
    Yes they should.
    · Share on FacebookShare on Twitter
  • dcs shootersdcs shooters Member Posts: 10,870 ✭✭✭
    edited November -1
    Yes, they sure will.
    · Share on FacebookShare on Twitter
  • PA ShootistPA Shootist Member Posts: 691 ✭✭✭
    edited November -1
    Please just be aware, there are commonly available two types of Lee shellholders. The "standard" ones will interchange with RCBS, Lyman etc. standard shellholders. Then there are the shell holders used for the Autoprime tool, commonly seen and sold in sets. These are different, much thinner, and will not interchange. I have both kinds myself.
    · Share on FacebookShare on Twitter
  • OdawgpOdawgp Member Posts: 5,380 ✭✭
    edited November -1
    quote:Originally posted by PA Shootist
    Please just be aware, there are commonly available two types of Lee shellholders. The "standard" ones will interchange with RCBS, Lyman etc. standard shellholders. Then there are the shell holders used for the Autoprime tool, commonly seen and sold in sets. These are different, much thinner, and will not interchange. I have both kinds myself.


    this is correct

    the lee auto prime shell holders are disk like and don't have the farel on the bottom to lock them into the press ram.

    If your using a RCBS priming tool the lee shell holders will be a little tuff to get into the tool but will work fine.
    · Share on FacebookShare on Twitter
  • CHEVELLE427CHEVELLE427 Member Posts: 6,750
    edited November -1
    you might find one that is a little tight sometimes, the one i got that was tight was a rcbs and was tight in a rcbs press[:(]
    · Share on FacebookShare on Twitter
  • brickmaster1248brickmaster1248 Member Posts: 3,344
    edited November -1
    thanks for the info guys im going to order my Lee shell holder kit tomorrow. seems to be cheaper that way!
    · Share on FacebookShare on Twitter
Sign In or Register to comment.