In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Thompson Encore 308 pistol loads

BHAVINBHAVIN Member Posts: 3,490 ✭✭
Anyone reloading for their Thompson Encore 308 pistol? We have a 15" 308 barrel and would like to shoot 165g Sierra bullets in it. We have found some but not a lot of specific pistol data in our books and will likely use rifle data to start. I am looking to see if anyone has any pet loads that shoot well for them in the Thompson pistols? Thanks.

Comments

  • perry shooterperry shooter Member Posts: 17,105 ✭✭✭
    edited November -1
    Hello I had a single shot conversion unit bolt action in 308 That had a 14inch barrel that FIT on a 1911 Frame[:D][:p] It kicked like a mule and my hand would go numb but it did shoot good I used the fastest burn rate powders listed in the rifle loads. Slower powders had too much muzzle flash to hunt with [:0][}:)]
  • 7mmbr7mmbr Member Posts: 136 ✭✭✭
    edited November -1
    Hey BHAVIN, if you go back to my earlier entries, you will find that I had some really good loads and results of my Lone Eagle in 308. I have some loads that are easily capable of MOA or sub consistently. Holler back if you need more.

    _____________________________________________________________________

    Seen the least, feared the most!!!!!!!!
  • BHAVINBHAVIN Member Posts: 3,490 ✭✭
    edited November -1
    Thank you! 7mmbr I will check out your loads for the 165 and work with them. I will probably be trying Varget, 748 and H335 as well. I think we have RE 15 but I may try yhe others before I but some IMR 4064.
  • BHAVINBHAVIN Member Posts: 3,490 ✭✭
    edited November -1
    Thank you! 7mmbr I will check out your loads for the 165 and work with them. I will probably be trying Varget, 748 and H335 as well. Did you happen to do anymore testing with 165g bullets and 748 or H335? Thank you.
Sign In or Register to comment.