In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Favorite loads for .270 Winchester

Sig220_Ruger77Sig220_Ruger77 Member Posts: 12,754 ✭✭✭
edited April 2008 in Perry Shooter Competition Shooting and Reloading Forum
I know that this has probably been done before, but I am curious as to what everybodies favorite load is for their .270 Winchester's. This one has been my pet load so far.

130 gr. Nosler Ballistic Tip
53 grs. of W760

Jon
· Share on FacebookShare on Twitter

Comments

  • swearengineswearengine Member Posts: 1,308 ✭✭
    edited November -1
    150 grain Nosler Partition
    53 grains N-204
    · Share on FacebookShare on Twitter
  • CapnMidnightCapnMidnight Member Posts: 8,038 ✭✭
    edited November -1
    Jon,
    Jack Oconors pet load, been using it for more than 30 years.
    270 Win
    130gr Nosler Partition B.T.
    59gr H 4831 SC
    Win LRP primer

    Happy shooting.
    W.D.
    · Share on FacebookShare on Twitter
  • pistlropistlro Member Posts: 17 ✭✭
    edited November -1
    I found some reduced recoil loads in Shooting Times. I have tried one and it is terrific. very accurate (less then an inch at 100) and very little recoil (about like a 223) It is 31.0 gr Accurate XMP 5744 pushing a 130 grain Speer spitzer, WLR primer Winchester brass. OAL 3.30 about 2440 fps this is a great practice load.
    I have also been shooting CT 130 with 55.0 grains of H4831sc WLR primers and Winchester cases OAL 3.340 velosity is 3150 it is very accurate out of my Mossberg 4x4 the load is from Nosler. This load has less recoil than factory. Should be a good hunting load
    · Share on FacebookShare on Twitter
  • JustCJustC Member Posts: 16,056 ✭✭✭
    edited November -1
    loaded for several, and the same load works in each one.

    win brass
    130gr Nosler BT
    58gr H4831sc
    cci LR primer

    seated to jump only about .025" to the lands as a hunting round.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.