In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options

Win760 for 30-06

ltmltltmlt Member Posts: 25 ✭✭
edited September 2008 in Perry Shooter Competition Shooting and Reloading Forum
Hi guys,
For my 30-06 with 180grs.Speer Grand Slam I use IMR4831 or IMR4350,but I am short of those powders,but I have some Win760.Is it a good idea to use that powder.
Thank you
· Share on FacebookShare on Twitter

Comments

  • Options
    B17-P51B17-P51 Member Posts: 2,210 ✭✭✭
    edited November -1
    From the W W site:

    180 GR. SIE SPBT Winchester 760 .308" 3.300" 50.0 2528 39,200 CUP 55.5 2743 48,700 CUP
    · Share on FacebookShare on Twitter
  • Options
    guntech59guntech59 Member Posts: 23,187 ✭✭✭
    edited November -1
    From the speer #14 manual for 180gr GS SP, tested OAL is 3.160". They suggest using a magnum primer.

    Min: 51.0@2540fps
    Min: 55.0@2677fps
    · Share on FacebookShare on Twitter
  • Options
    ltmltltmlt Member Posts: 25 ✭✭
    edited November -1
    Thank you for the info,I have all those data from my different data books,but what I want to know is if anybody is using the Win760 in the 30-06 and having good result ,if so I will work a load for Moose hunting,and if not I will go and buy what I normally use.
    Thank you
    · Share on FacebookShare on Twitter
  • Options
    FWAdditFWAddit Member Posts: 918 ✭✭✭✭
    edited November -1
    Win 760 works very well for me with 165-gr. bullets in .30-06. Accuracy and velocity are on a par with that of IMR 4350. I would have confidence in it for 180-gr. bullets, though to be honest I don't load those.
    · Share on FacebookShare on Twitter
  • Options
    tsr1965tsr1965 Member Posts: 8,682 ✭✭
    edited November -1
    You can use it as a ball type powder replacement for IMR 4350, or H4350. It is identical to H414 also. Being a ball type powder, and not extruded, it flows wonderfully thru a powder measure. It works well with a host of cartriges from the 243 Winchester thru the 300 Win. Mag.

    Here is a link to the Hodgdon/IMR/Winchester powder website. You can get all kinds of data from there.

    http://data.hodgdon.com/main_menu.asp

    Best
    · Share on FacebookShare on Twitter
  • Options
    guntech59guntech59 Member Posts: 23,187 ✭✭✭
    edited November -1
    quote:Originally posted by ltmlt
    Thank you for the info,I have all those data from my different data books,but what I want to know is if anybody is using the Win760 in the 30-06 and having good result ,if so I will work a load for Moose hunting,and if not I will go and buy what I normally use.
    Thank you


    Sorry. I thought you were looking for "book" data. I have no personal experience with that load combination. Good luck!
    · Share on FacebookShare on Twitter
  • Options
    rp85rp85 Member Posts: 360 ✭✭✭
    edited November -1
    hello;

    have used ww760 for 20 years. use 51.5 grains with a magnum primer. if you do not use a magnum primer you might/will get a "pop bang".

    speed from 22" barrel, ruger mk11, 2565 fps. using speer bullet also. ww760 and h414 the same powder.

    zero 1" high = zero at @150 yards. never lost a deer using this load.

    also use the same powder charge for a hornady 170gr. bullet. very accurate. zero at 100 yards with this bullet will equal 1 inch high at 100 yards for the speer bullet.

    rp
    · Share on FacebookShare on Twitter
Sign In or Register to comment.