In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Lee loader...what model ???

E.J.W.E.J.W. Member Posts: 6 ✭✭
edited October 2008 in Perry Shooter Competition Shooting and Reloading Forum
I picked up a Lee progressive loader in a "package"deal at a garage sale. I'm not famliar with the Lee products so I need some assistance identifying it so i can post an accurate add on Gun Broker.com.
It has a stationary block at the top in which the three dies screw into. There is an Auto Disk powder measure on it and four long tubes with a funnel at the top (casings go in these tubes I think)
There is a auto primer feed on it also. When you work the handle the disc where the casings are held rotates with each stroke.
If a picture will help send me a PM and I'll send one back.
thanks.
Eric.
· Share on FacebookShare on Twitter

Comments

  • jonkjonk Member Posts: 10,121
    edited November -1
    Either a Lee Pro 1000 or Lee Loadmaster.

    www.leeprecision.com has pics and descriptions of both.
    · Share on FacebookShare on Twitter
  • dcs shootersdcs shooters Member Posts: 10,870 ✭✭✭
    edited November -1
    Sounds like the Lee Pro-1000 with the case feeder. The Pro-1000 has three die stations, The Load master has five. Sorry the Classic has four.
    · Share on FacebookShare on Twitter
  • E.J.W.E.J.W. Member Posts: 6 ✭✭
    edited November -1
    Thanks for the link jonk.
    I looked at the site, the base or majority of the press looks like the Turret press. The Pro 1000 and Load Master look way different.
    What I don't see on the turret press is the round rotating disc that holds three casings (one under each station)at a time by their rim. The Turret looks to only have room for one case at a time.
    Would either of you mind taking a look at the photo's I have?
    Thanks
    Eric.
    · Share on FacebookShare on Twitter
  • jonkjonk Member Posts: 10,121
    edited November -1
    sure, send me the pics at endofwork@netzero.net
    · Share on FacebookShare on Twitter
  • dcs shootersdcs shooters Member Posts: 10,870 ✭✭✭
    edited November -1
    Sure will, send to rclink@yahoo.com.
    · Share on FacebookShare on Twitter
  • richbugrichbug Member Posts: 3,650
    edited November -1
    quote:Originally posted by dcs shooters
    Sounds like the Lee Pro-1000 with the case feeder. The Pro-1000 has three die stations, the Load master has four.


    Loadmaster has 5 stations, not 4.
    · Share on FacebookShare on Twitter
  • E.J.W.E.J.W. Member Posts: 6 ✭✭
    edited November -1
    jonk & dcs shooters,
    I sent two photos to your links.
    thanks again.
    E.
    · Share on FacebookShare on Twitter
  • dcs shootersdcs shooters Member Posts: 10,870 ✭✭✭
    edited November -1
    You have the Lee Pro-1000. They are a decent press, I used one for a while. The only complaint I had was it didn't taper crimp pistol ammo.
    · Share on FacebookShare on Twitter
  • E.J.W.E.J.W. Member Posts: 6 ✭✭
    edited November -1
    Thanks dcs for sharing your knowledge on this press.
    I have a bunch of stuff to go with it like three die sets for 357, 40s&w & 380, a 10 pk of 380/9mm ammo boxes, the 4 tall case feed tubes and funnel,extra turrets and multiple discs for the powder measure.
    We'll see if it sells on the auction site.

    Thanks again.
    E.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.