In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Help with cracked necks

ljc2tallljc2tall Member Posts: 87 ✭✭
edited October 2008 in Perry Shooter Competition Shooting and Reloading Forum
I have been reloading 270 wsm cartridges with 53 grs. of Accurate XMR 4350 powder, large standard rifle primers, once fired brass and 150 gr sst hornady bullets. I am shooting them out of a Browning BAR. The problem I am having is the necks are splitting on some of the cases. Any suggestions? Thanks in advance.
Ken
· Share on FacebookShare on Twitter

Comments

  • ChetStaffordChetStafford Member Posts: 2,794
    edited November -1
    I loaded for .223 wssm for a while and I expeirienced some issues with necks cracking. I think some of it is do to the neck of the wsm/wssm cases being so thick.

    I would think with the necks being so thick that after very few sizings and firings they would work harden pretty fast.

    I would suggest annealing the cases to see if that stops the cracking. It did for me

    Best of luck and let us know what you figure out.
    · Share on FacebookShare on Twitter
  • mrbrucemrbruce Member Posts: 3,374
    edited November -1
    They need to be annealed, plain and simple.......
    Did the once fired brass come from your chamber ?
    · Share on FacebookShare on Twitter
  • ljc2tallljc2tall Member Posts: 87 ✭✭
    edited November -1
    Some was fired in my rifle, but most was not. I will now do a search on annealing.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.