looking for .270 win hornady 130gr loads

speedbuggy16v

I am looking for load data for .270 win with hornady 130 grain SST bullets, preferably using H4895 or IMR4064, I know neither powder are the "ideals" but thats what I have
thanks
Corey

RCrosby

I always load my .270 with 4831 so can't offer a specific recommendation for your powders except for the standard that should always apply anyway; check several manuals, start low and work up slow. Over the years I've run into several instances where a load that was well under max in one rifle nearly took the shingles off roof in another. Hasn't happened often, but often enough to keep me honest and humble.

wsm 325

hi jus opened the hornady reload book and they suggest, IMR 4064-41.6 43.4 45.1 46.8 and the max being 48.6. they didnt test the h4895.nosler also didnt test the H4895. hope this helps, good luck

speedbuggy16v

thanks to all that replied now if I can figure out OAL I will give it a shot, might have to go buy some new powder though, oh well, just gives me more options...
I think I just put a new monkey on my back if you ask me.
Corey

mbsams

57 gr of H4831 - it was good enough for Jack O'

JustC

58gr H4831sc will be quite pleasing with a 130gr pill and CCI primer