In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Resizing question .....update

toad67toad67 Member Posts: 13,009 ✭✭✭✭
edited July 2009 in Perry Shooter Competition Shooting and Reloading Forum
Thanks for all of the advice in one of my previous posts regarding my 257 WBY dies not fully resizing with brass fired from another rifle. I tried many of the things that were mentioned and it appears that the die is not coming down far enough to size the last little bit of the case. So I called RCBS and they said this problem is quite common. All I have to do is send them the sizer die, 5 rounds fired from my rifle and 5 rounds that were resized in the mentioned die and would not chamber in my rifle. They will re cut the die so that it fits the cases fired from my chamber and send it back to me at no charge. I think that this would be a little easier than taking a touch off of the shell holder. Thanks again to all who helped.

Todd
· Share on FacebookShare on Twitter

Comments

  • oneoldsaponeoldsap Member Posts: 563 ✭✭✭✭
    edited November -1
    Service above and beyond by RCBS .The people that make the things we play with know what customer service means. I would have gone out and bought a new set of Reddings , and wasted X $
    · Share on FacebookShare on Twitter
Sign In or Register to comment.