In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Cast bullet lube
264fan
Member Posts: 81 ✭✭
Just getting back into casting pistol bullets, what is a good lube that doesn't get sticky like 50 50 beeswax and alox?
Comments
Any that aren't sticky will require a heater.
You might also consider Lee Liquid Alox. It's a tumble lube. It is fine for handguns except the largest magnums. It's all I use in my 38 special, 32 auto, and 45 acp... though I do prefer the 50/50 for 9mm as it is a little more high pressure round and I find the sealing effects are better with 50/50.
Whatever lube you use, bullet size is paramount even more than anything. 1/1000 OVER bore diameter is a good place to start.
I second the 50-50 mix as still king of the hill for pistol bullet lubes.
I don't, so I won't address lubes made for that method. You can dip bullets into melted Johnson's Paste Wax, which contains carnauba wax. You can also tumble-lube in Lee Liquid Alox. Either way is more than satisfactory for all but the hairiest handgun loads. I use both, but I probably LLA tumble more handgun bullets and JPW dip more rifle bullets.