In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
12 ga 3/4 oz load data
45gunner
Member Posts: 14 ✭✭
Hello everyone! Does anyone have any load data for 12 ga 3/4 oz loads using Remington STS type shells? I have found one load on the Hodgdon site using Clays and Federal wads, but I would like to get a few more. Clays powder is tough to get in my area. So I would like a few more with other powders, say Green Dot.
Any help would be appreciated.[:D]
Any help would be appreciated.[:D]
Comments
Hello everyone! Does anyone have any load data for 12 ga 3/4 oz loads using Remington STS type shells? I have found one load on the Hodgdon site using Clays and Federal wads, but I would like to get a few more. Clays powder is tough to get in my area. So I would like a few more with other powders, say Green Dot.
Any help would be appreciated.[:D]
As always, you need to verify the load data yourself, but I have been using the 12 Ga., 2-3/4" STS hulls with:
Hodgdons Titewad 16.7 grains
Remington 209PSTS primers
Remington TGT12S wads with a 20 Ga-1/8" filler wad
7/8 oz of Lawrence magnum #9 shot
These seem to do well with skeet without too much recoil from my old Daly or the older Fox