In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
need some 45-70 info NEW TO 45-70 STUFF
CHEVELLE427
Member Posts: 6,750
is there any difference in leverloution brass and say winchester brass,
this will be shot out of a NE Handy rifle, loaded some 325 gr in some rem case the other night and i had to seat the bullet just a tad bit deeper as it was hard to close and the bullet was sticking in the rifling.
brass was in range for oal. may try to trim this to the min oal ans see if that will help
this will be shot out of a NE Handy rifle, loaded some 325 gr in some rem case the other night and i had to seat the bullet just a tad bit deeper as it was hard to close and the bullet was sticking in the rifling.
brass was in range for oal. may try to trim this to the min oal ans see if that will help
Comments
IM waiting for an answer from them on the oal
I usually keep the Leverevolution brass seperate when I reload, but thats just me.
Jon
than most 45/70 brass. I suggest you sort and measure your different brands and trim and reload accordingly. Bob