In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

using large pistol magnum primers and not regular

rp85rp85 Member Posts: 360 ✭✭✭
edited February 2011 in Perry Shooter Competition Shooting and Reloading Forum
hello;

purchased a 1916 spanish mauser in 308win to shoot cast bullets. shooting the lee 309-180r bullet. using 18.5 grains of alliant 2400 the rifle will produce 1" groups at 50 yards.

discovered i have 2k large pistol magnum primers. is there any issue using large pistol magnum primers and not regular large rifle primers for the above load???

the large pistol magnum primers will only be used for shooting cast bullets.

thanks for any input.

rp
· Share on FacebookShare on Twitter

Comments

  • dcs shootersdcs shooters Member Posts: 10,870 ✭✭✭
    edited November -1
    No, there is no issue.
    If the load is max back off 10%.
    If not they might help the powder burn.
    · Share on FacebookShare on Twitter
  • jonkjonk Member Posts: 10,121
    edited November -1
    Not only no problem, but many users with reduced loads report better accuracy with pistol primers.

    Edit: I saw you post this over on the Cast boolit forum too. If anyone can give you the definitive answer, it's there; they are without doubt the most educated group of dedicated cast lead shooters on earth. If it's been done, they've done it.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.