In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

bow sites

releaseonereleaseone Member Posts: 5 ✭✭
edited December 2009 in Bow Hunting and Target Archery
When installing a site is there a standard starting point or measurement to which you set your pin in relation to the arrow?
· Share on FacebookShare on Twitter

Comments

  • buckeyboybuckeyboy Member Posts: 5,833
    edited November -1
    line the pin's up so they are in line with the arrow.

    Then get about 5 yards fron the target aim for the center dot.release the arrow. if you hit to the left move the sight a little to the left. Then take another shot see where it hits. Then repeat the proces HIT left move sight left Hit right M0ve sight right. same goes for up and down.when you hit center of the target move back to 15 yards see where you hit repeat process.. till you are hitting where you aim at 20 and 30 yards
    hope this helps you out[;)]
    · Share on FacebookShare on Twitter
  • releaseonereleaseone Member Posts: 5 ✭✭
    edited November -1
    Thanks for your replies, it has gotten me back into the groove and on target.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.