In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

insert epoxy

wvhuntwvhunt Member Posts: 822 ✭✭✭✭
edited March 2010 in Bow Hunting and Target Archery
What do you all use when puting in inserts to your arrows? Does it matter?
· Share on FacebookShare on Twitter

Comments

  • MrGunz22MrGunz22 Member Posts: 2,086 ✭✭✭
    edited November -1
    I used to use hot glue sticks on the aluminum and wood, now I use the epoxy on my carbon shafts.
    · Share on FacebookShare on Twitter
  • wvhuntwvhunt Member Posts: 822 ✭✭✭✭
    edited November -1
    Is a super glue type epoxy ok or a slow setting, manual mixing epoxy better?
    · Share on FacebookShare on Twitter
  • MrGunz22MrGunz22 Member Posts: 2,086 ✭✭✭
    edited November -1
    I use a 2 part, never tried the super glue epoxy. If you think its equivalent it will probably work. Try it on 1 or 2 arrows and shoot them into a 3-d target a couple of times. If the inserts stay in place after you pull the arrow out of the target you should be good. Make sure you allow the epoxy to cure for a full 24 hrs before you shoot them.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.