In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options
NEF/H&R Handi Rifle parts?
DONDALINGER
Member Posts: 1,541 ✭✭✭
I have a NEF Handi rifle chambered in .500 S&W. This weekend the transfer bar broke at the small round pin it rides on. Does anyone know where I can find the transfer bar assembly? I have checked online as well as Brownells and Numrich with no luck. Any info much appreciated. Don
Comments
They might even do a parts exchange
I have a bunch of single shot break open shotgun from them
One sheared off the lug on the bbl that holds the forend on and keeps the gun together
They took care of it
Mike
https://en.wikipedia.org/wiki/H&R_Firearms
H&R 1871, LLC is a manufacturer of firearms under the Harrington & Richardson and New England Firearms trademarks. H&R is a subsidiary of the Remington Outdoor Company. H&R ceased production February 27, 2015. Wikipedia
That is the part that always breaks along with the firing pin.
Some places list the part (transfer bar) other say factory installed only. I have changed out dozens of both in the distant past.
Are you OK with doing the repair yourself ?
I have a complete set of used internals if interested $50 + $6 shipping or I will do $46 shipped on the transfer bar assembly, I believe they came from an SB2 but I no longer have the tag, they are slightly used.
email ricksuek@gmail.com if interested.
Almost certainly the would repair it for free under warranty if you sent back the half of the gun needing fixing
They might even do a parts exchange
I have a bunch of single shot break open shotgun from them
One sheared off the lug on the bbl that holds the forend on and keeps the gun together
They took care of it
Mike
Mike,
Thanks for the response. I called H&R 1871 today and they will not fix it. The customer service rep was a real jerk on the phone. He said that any H&R/NEF Handi rifle is "out of warranty" as they only came with 2 year warranties and have not been made since 2015. He also said they do not sell parts for them either. Luckily, I sourced the part from Allmans and its being shipped in the morning. Thanks again for the response.
Don
Don,
Are you OK with doing the repair yourself ?
I have a complete set of used internals if interested $50 + $6 shipping or I will do $46 shipped on the transfer bar assembly, I believe they came from an SB2 but I no longer have the tag, they are slightly used.
email ricksuek@gmail.com if interested.
I actually found a new transfer bar assembly from Allmans being shipped in the morning. Thanks for the offer to sell me yours. Don
quote:Originally posted by pip5255
Don,
Are you OK with doing the repair yourself ?
I have a complete set of used internals if interested $50 + $6 shipping or I will do $46 shipped on the transfer bar assembly, I believe they came from an SB2 but I no longer have the tag, they are slightly used.
email ricksuek@gmail.com if interested.
I actually found a new transfer bar assembly from Allmans being shipped in the morning. Thanks for the offer to sell me yours. Don
your welcome, I have worked on these type guns for a long time so if you have any issues just give a yell.
Sorry to here that they are kaput and have sunk so low
Sorry I ever responded to your thread or offered an opinion
Hate on.
Mike
I am sorry to here you had a bad experience - they were great to me when I did business with them
Sorry to here that they are kaput and have sunk so low
Sorry I ever responded to your thread or offered an opinion
Hate on.
Mike
Mike,
No hate here brother. It was a sincere "Thank you" for taking the time to respond. I was hoping they would fix it, but they turned out to be pretty nasty. Nothing against you. I hadn't considered contacting them until you mentioned it. At least that option has been explored.
Thanks, Don
quote:Originally posted by DONDALINGER
quote:Originally posted by pip5255
Don,
Are you OK with doing the repair yourself ?
I have a complete set of used internals if interested $50 + $6 shipping or I will do $46 shipped on the transfer bar assembly, I believe they came from an SB2 but I no longer have the tag, they are slightly used.
email ricksuek@gmail.com if interested.
I actually found a new transfer bar assembly from Allmans being shipped in the morning. Thanks for the offer to sell me yours. Don
your welcome, I have worked on these type guns for a long time so if you have any issues just give a yell.
I might take you up on that offer. I will keep your email and give you a yell if I run into any snags. It looks pretty straight forward. I was going to replace it from the top and not remove the hammer, trigger, trigger connector or trigger guard, but I may have to take everything out. It appears I can remove the pin that holds it and replace it without removing anything else except maybe the barrel break lever. [?]
Why do they have customer service reps and a phone and office if they are defunct - por que???
Just to say no to folks...
Are all 3 gone: H&R -NEF - Pardner???
Mike
Interesting - they claim to be the largest manufacturer of single shot shotguns in the world - but the website won't let you click on shotguns
They are still in business - but won't honor any previous warranties
Repair center in Quebec Canada
It's the same stuff with the same name
[?][?][?]
Mike
the ones with the transfer bar lose hammer force due to the transfer bar and that is the purpose of shortening the hammer stop to provide additional travel to help with force loss but beware because not enough hammer stop clearance causes failure of the transfer bar and I do not recommend doing so.