In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options
M1A Ammunition
penguin1
Member Posts: 97 ✭
What type and time period ammo can you safely shoot in an M1A 308 rifle?
Comments
If you plan to use the rifle for hunting, which some people do, and plan to use bullets above 180 grain, then you'll need an adjustable gas plug, such as this one made by Schuster:
https://www.midwayusa.com/product/1004719353
I own an M1A, but I don't hunt with it. If hunting with the M1A your goal then someone else will have to chime in.
Can't recall off the top of my head.
Mike
https://www.rifleshootermag.com/editorial/tips-for-safe-handloads-in-your-m1a-style-rifle/83672
Don't forget the older LC Match that was 168gr bullets.... but yes, basically you are looking at M80 NATO spec stuff. For hunting, commercial 150grn loads will be close enough, but watch out for the "reduced recoil" loads and heavier bullet loads, since the gas pressure at the port will be drastically changed, which can cause nasty things like bent op rods.
One of the many reasons I love the FAL design - not as accurate, but the adjustable gas just plain rocks.
Ammo bending op rod? Didn't know these rifles were that fragile.
It has to do with the actual gas pressure at the gas port. With the big slow bullets, or the hornady "Light Magnum" or "reduced recoil" or "superformance" a slower powder is used to build pressure for longer, so pressure can still be building at a pretty good rate when the bullet passes the port, which means that it is a harder "slam" on the end of the op rod. Some more googling to get you some interesting links shows the bent op rod is more of a Garand problem than a M14/M1A problem due to the differences in the op rod design, but it should still be a concern.
3. The M1A is designed and built to specifications to shoot standard factory .308 made to SAAMI specifications or 7.62x51 NATO ammunition. The specifications for standard military ammunition include harder primers to withstand the slight indentation from the firing pin when the bolt chambers a cartridge. This slight indentation is normal.
The use of civilian ammunition with more sensitive primers or handloads with commercial primers and/or improperly seated primers increase the risk of primer detonation when the bolt slams forward. This unexpected ?slam fire? can occur even if the trigger is not being pulled and if the safety is on. Use of military specification ammunition will help avoid this. Every shooter should use extreme caution when loading this or any other firearm. See page 17 for instructions on proper loading to help avoid a ?slam fire?. Also see enclosed article on ?Slam Fire? written by Wayne Faatz.
The manual didn't have Mr. Faatz's article in it.
From the little reading I've done I think I'd stick with standard 7.62x51 NATO rounds to avoid slam fires!