In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Marlin 1894 Jam

RCrosbyRCrosby Member Posts: 3,808 ✭✭✭

Re: .44 Mag. Marlin Lever


Many threads on this problem, I know and most seem to recommend a new carrier. Might there be an easier way?

If load the magazine and cycle the action, all is smooth, first to last.

Fire one round and it locks. Rifle appears to be in excellent condition. If I remove the lever and bolt and reassemble, all seems well again, until the next fired round.

When I have it apart I can't see any obvious problem.

Typical? Any suggestions? (Have been unable to access this site for over a year. Finally back and will plan on digging into prior posts as I'm sure some will sugggest.

Thanks,

Rob

Comments

  • toad67toad67 Member Posts: 13,008 ✭✭✭✭

    They can't be cycled easily, the firmer the better.

  • RCrosbyRCrosby Member Posts: 3,808 ✭✭✭

    I'll give that a try and let you know. May be a few days.

    Thanks!

    Rob

  • Lady Rae Lady Rae Member Posts: 2,352 ✭✭✭✭

    I have a Marlin 989... I have been having a lot of mystery issues since I started shooting it, the last time it wouldn't cycle at all unless I did it manually with the bolt... My friend was on the phone walking me through. Anyway I haven't had time to tear it apart again for pictures but we are thinking it's the firing pin... Something to think about.

    "Independence Now, Independence Forever."

    John Adams

  • truthfultruthful Member Posts: 2,123 ✭✭✭✭

    The problem most often is that while cycling one round up to the chamber, a second round fails to be stopped at the magazine.

  • GrasshopperGrasshopper Member Posts: 16,991 ✭✭✭✭

    Might try different ammo manufacturers. Size does matter in this case in SOME instances. I had same issue with a couple some years ago.


    @Lady, it's not the firing pin. Those and other Marlins of that period have had issues and other than keep it clean the ones I had worked better with CCI ammo. OF COURSE your mileage may and will vary.

  • Lady Rae Lady Rae Member Posts: 2,352 ✭✭✭✭

    "Independence Now, Independence Forever."

    John Adams

  • elubsmeelubsme Member Posts: 2,238 ✭✭✭✭

    Typical "Marlin Jam" Quite common in the lever models. Many years ago my hunting buddy lost a fine white tail due to this malady. He was so mad he traded for a '64 Winchester.

  • yoshmysteryoshmyster Member Posts: 21,927 ✭✭✭✭

    How is the carrier/lifter (that bit near the follower). Oh that reminds me does it have an after market aluminum follower? Mine didn't like the follower. It was a little long to the carrier so it would bind. Before I spent money I also lightly sanded and polished the lifter/carrier (the bit that's close to the follower).

    Also did you clean the magazine tube and spring? Hopefully it doesn't have a dent or a burr.

    Maybe the bolt is dry? Good cleaning there while you're in there.

Sign In or Register to comment.