Barrel interchange

Comments

• Options

  rsnyder55 Member Posts: 2,526 ✭✭✭

  January 2015 edited November -1

  Comparing the part numbers at gunpartscorp (Numrich) I would say no, but you can look. Even the same rifle in different years have different part numbers for the same caliber barrel.

  0 · Share on FacebookShare on Twitter
• Options

  neacpa Member Posts: 2,703 ✭✭✭

  January 2015 edited November -1

  Thanks, I didn't think about looking about parts numbers on e-gunparts. But if they are like some equipment parts I have seen, they may have different numbers but they will interchange.

  0 · Share on FacebookShare on Twitter
• Options

  1911builderMarine Member Posts: 48 ✭✭

  January 2015 edited November -1

  Measure the number of threads per inch and the diameter of the threads on both barrels.
  
  That info will give you an idea of where to start...
  
  Charles.

  0 · Share on FacebookShare on Twitter
• Options

  babun Member Posts: 11,054 ✭✭✭

  January 2015 edited November -1

  [img][/img]All 110, 111, 112 barrels interchange except for the large shank WSW magnum and a few of the target actions which also have the bigger diameter.
  
  To ID a large shank, there is a step down in barrel size right after the barrel nut with the large shank. Large shanks come in WSM's , and some of the target actions.
  http://www.eabco.com/Savage_Rifle_Barrels_by_E_R_Shaw.html

  0 · Share on FacebookShare on Twitter