In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options
20 gauge shells in a 16 gauge gun?
gmccon
Member Posts: 56 ✭✭
I have my grandfather's 16 gauge Fox Sterlingworth.
Before my father passed and left it to me, he told me that if I had trouble getting 16 gauge shells, that he had shot 20 gauge shells through it without any problem.
What do you say? Doable? Considerations?
greg
Before my father passed and left it to me, he told me that if I had trouble getting 16 gauge shells, that he had shot 20 gauge shells through it without any problem.
What do you say? Doable? Considerations?
greg
Comments
You have your grandfathers gun. Probably pretty old, 1930's
or so? This isn't the thirties. Back then if ammo wasn't on the shelf, or in the sears catalog, it wasn't available, so you made it with what you could get. Since you are on this site, you obviously have internet access and the skill to find the info you need, so you should be able to find the proper 16ga ammo with no problems, even if it isn't available locally.
Also, ammo has come a long way since then, as has metallurgy. This gun has sentimental value I assume? You want to pass it down to your kids? Then why risk blowing it up?
The only good reason to use 20's in there would be if you had to, otherwise get some 16's.
I have my grandfather's 16 gauge Fox Sterlingworth.
Before my father passed and left it to me, he told me that if I had trouble getting 16 gauge shells, that he had shot 20 gauge shells through it without any problem.
What do you say? Doable? Considerations?
greg
Could you get away with it in an emergency? Yes, probably you could.
Is there a good reason to do it today? I doubt it.
As mentioned, you'd be ruining the shells at least.
While I don't think the gun would "blow up" (ie overall shotgun operating pressures are relatively low, compared to many guns, and you're probably not increasing pressures to dangerous levels), gas venting into the rear of the action around an undersized shell can't possibly be good for the gun or for you. You're likely to see marked increase in chamber fouling, and that could make it hard to put 16 gauge shells in there without vigorous scrubbing. Also, as mentioned, you may not get good extraction (though the loose fit of the smaller shells may mean you don't need it. . .they may just fall right out!).
Just find some 16 gauge shells. While not that common, they are in current production, and you should be able to find them if you look.