Convert Kimber Custom .45 to 38 super??

psantos

I am curious can I use a colt 70 series slide & extractor (obviously barrel and bushing) and simply add this top end to my Kimber?/It would seem to be simple like the .22 kits out there.Is the Colt slide compatable to the kimber? I think the 70 series is 80 series is not.Would Numrich be the best place to buy parts??thxpaul

compgunfire

You'll also have to change the ejector on the frame to 9mm/.38 super. There will also be some fiting required - barrel & link area and maybe slide fit.

psantos

I think a .38 super slide is needed due to breech face dimensions, the extractor is the same part, but the breech face which is part of the slide, is narrower to accomodate the .38 super cartridge.I think!!!Paul

Rocklobster

Won't work unless you get a 'smith to redo the feed ramp-it's different on a .45 than a .38 Super.

Ross C. McDonell

Rock is right. A good smith can do the work for you. However Kimber is building guns in .38 super now. If you want to do your own conversion use a 9mm gun as the base and then you can swap in the .38 super. Or better yet really step it up and go for the 9x23.

Rocklobster

I believe he uses ramped-barrelled units-then it doesn't matter.That's a good point about the 9x23-it produces ballistics equal to major-caliber.38 Super loads,with a standard barrel.The.38 Super major loads require a fully-supported barrel.

will270win

Why not go all out and convert to .38 Casull?Just as much money and work; more power.

---

When it absolutely, positively,has to be destroyed overnight.....U.S. MARINES. will270win@aol.com ~Secret Select Society Of Suave Stylish Smoking Jackets~

Rocklobster

A LOT more money.