In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

A real gun thread...any info on this T/C would be appreciated

William81William81 Member Posts: 25,332 ✭✭✭✭
in General Discussion

This one has me stumped. I have tried to research this one and keep hitting a dead end… I was told it was made in 1996. It is in .22LR , the hammer has a switch to go between rimfire and centerfire. Any info would be appreciated….

IMG_4197 - Copy.JPG
IMG_4200 - Copy.JPG

· Share on FacebookShare on Twitter

Comments

  • He DogHe Dog Member Posts: 51,593 ✭✭✭✭

    Looks like an Encore, can barrels and stocks be changed?

    · Share on FacebookShare on Twitter
  • William81William81 Member Posts: 25,332 ✭✭✭✭

    Yes they can. No other markings on the barrel or frame…

    · Share on FacebookShare on Twitter
  • He DogHe Dog Member Posts: 51,593 ✭✭✭✭

    I think encore is correct, I may have a manual downloaded. I have a couple.

    · Share on FacebookShare on Twitter
  • William81William81 Member Posts: 25,332 ✭✭✭✭

    Thanks He Dog… That gives me another way to try and look this up…

    · Share on FacebookShare on Twitter
  • elubsmeelubsme Member Posts: 2,188 ✭✭✭✭

    T.C. Contender with a carbine barrel which is interchangeable for another carbine barrel or a pistol barrel with appropriate handgun stock. These are neat, I have one, but in order to install a pistol barrel the action has to be registered as a handgun. Don't put a short barrel on it without removing the rifle stock, very illegal as a short barrel rifle. Look up Contender rifle or carbine and you will see others like yours.

    · Share on FacebookShare on Twitter
  • William81William81 Member Posts: 25,332 ✭✭✭✭
    https://forums.gunbroker.com/discussion/comment/11445261#Comment_11445261

    Thanks for the info..

    · Share on FacebookShare on Twitter
  • He DogHe Dog Member Posts: 51,593 ✭✭✭✭

    I don't get that, no <18" barrel on a rifle stock, yes, but I bought both of mine as actions, and have pistol and rifle stocks to mix and match. Regestering as a handgun must be a state thing. Mine went through an FFL, but ain't registered.

    · Share on FacebookShare on Twitter
  • elubsmeelubsme Member Posts: 2,188 ✭✭✭✭
    https://forums.gunbroker.com/discussion/comment/11445263#Comment_11445263

    With a pistol barrel installed you have an unregistered handgun, if you leave the rifle stock on, you have an illegal short (less than 16 inch) barrelled rifle. I bought my first one as a handgun and it is legal as such with any length barrel. Remember years ago T.C. stopped production of the .45/410 barrel as ATF classed it as a 10" shotgun. But, Hotshot .357's and .44 were O.K. go figure.

    · Share on FacebookShare on Twitter
  • He DogHe Dog Member Posts: 51,593 ✭✭✭✭

    Pistol barrel on hand guns stocks should be legal. I also have rifle stocks for longer barrels and "rifle" calibers. I do have the .45 Colt/.410 barrel. Legal on a handgun? Or not legal assembled at all? If I only have .45 Colt ammo?

    · Share on FacebookShare on Twitter
  • Gregor62Gregor62 Member Posts: 3,143 ✭✭✭✭

    Back in 2003 when I had my FFL, the TC Encore was one of the hottest selling guns on the market.

    The ATF made it known specifically, that each Encore frame had to be registered as a pistol. They were very clear about that during my "training" with Moulder and Scully.

    I can't validate the Contender version of the TC product line, but I believe they are grandfathered as far as the interchangeable barrels.

    I do know for sure that the Contender frame didn't have to be registered at the time of my indoctrination.

    The Contender frame should also have a conversion from rim-fire to center-fire. Encore and Pro-Hunter do not.

    · Share on FacebookShare on Twitter
  • Gregor62Gregor62 Member Posts: 3,143 ✭✭✭✭

    The Encore was introduced in 1998.

    · Share on FacebookShare on Twitter
  • William81William81 Member Posts: 25,332 ✭✭✭✭
    edited July 16
    https://forums.gunbroker.com/discussion/comment/11445314#Comment_11445314

    Thank you, this verified 1996 on this model and it is not an Encore but simply a Contender ?

    · Share on FacebookShare on Twitter
  • elubsmeelubsme Member Posts: 2,188 ✭✭✭✭
    https://forums.gunbroker.com/discussion/comment/11445317#Comment_11445317

    Yep.

    · Share on FacebookShare on Twitter
  • William81William81 Member Posts: 25,332 ✭✭✭✭
    edited July 16
    https://forums.gunbroker.com/discussion/comment/11445326#Comment_11445326

    Thank you for all the information….. I am still trying to figure out if this was a limited edition. As I understand this model, it was offered in 1996. It was sold as a .22LR carbine but other barrels are available but it will not accept any TC barrel, only specific ones.

    Thank you elubsme and all that have offered information… I am now trying to find a 1996 TC catalog to try and figure this out..

    · Share on FacebookShare on Twitter
  • redhawkk480redhawkk480 Member Posts: 2,516 ✭✭✭✭

    that doesn't look like stainless to me , I wonder if that is their  Armour Alloy coating , look at the serial # does it start with A if so then it's Amour Alloy not stainless

    · Share on FacebookShare on Twitter
  • William81William81 Member Posts: 25,332 ✭✭✭✭
    https://forums.gunbroker.com/discussion/comment/11445390#Comment_11445390

    No it starts with S…. The lighting is likely the reason..

    · Share on FacebookShare on Twitter
Sign In or Register to comment.