In order to participate in the GunBroker Member forums, you must be logged in with your account. Click the sign-in button at the top right of the forums page to get connected.

Wanted 16 & 28 gauge die sets for RCBS press

AdamsQuailHunterAdamsQuailHunter Member Posts: 1,997 ✭✭✭✭
I need a set of both 16 gauge and 28 gauge die sets for a AmmoMaster-2 press (that has an insert that unscrews to allow for 1-1/2 x 12 dies) . Val-Scott - Herters - Lachmiller - or any other manufacturer. These were produced quite some time ago and are not currently made.

Many Thanks for taking the time to view my request. Best Regards - AQH


  • B17-P51B17-P51 Member Posts: 2,199 ✭✭✭
    edited November -1
    Could you possibly mean an RCBS "Rock Chucker" press? If that is the case, then any press with 7/8 - 14 threads will work as that is the standard used. All single stage presses use this thread except Herters.
    You may also want to put a post in the reloaders forum referencing this post.
  • AdamsQuailHunterAdamsQuailHunter Member Posts: 1,997 ✭✭✭✭
    edited November -1
    Hello B17-P51 -- Both fine aircraft. My father-in-law was unfortunately flying a "Liberator" and was not escorted by the "Red Tails" over Italy and was shot down and spent time in a POW camp.

    I should not have used the term "Rock Crusher" for AmmoMaster-2. There is an insert/bushing in the top for 7/8 X 14 dies - rifle and pistol dies. When the insert/bushing is removed - you can use 1-1/2 X 12 dies for shotgun shells. The shotgun shell 16 & 28 gauge dies are the ones I need.

    Best Regards - AQH
Sign In or Register to comment.