In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
which press to get
yachtdave
Member Posts: 406 ✭✭✭
A customer of mine wants to get into reloading. He will be reloading 308 and .50 possibly one more caliber for a handgun. IM not up on all the reloading press out there, so was wondering what you guys would recommend. he likes the idea of a progressive.
Riverviewsales.net
Riverviewsales.net
Comments
gun control is not about guns, it is about CONTROL!
There's always more than one way to look at things.
There are a couple of presses that will handle 50 BMG as well as standard cartridges. RCBS makes the AmmoMaster and Hornady has their 50 BMG press with Lock-n-Load. Corbin makes what I consider to be one of the best single stage presses for both reloading and bullet swaging and it will handle 50 BMG. The other Corbin brother (www.rceco.com) makes the Walnut Hill Press which is also equal to these tasks.
It's a whole 'nuther story when someone wants to start out with a progressive. I don't recommend it until they have some experience with loading on a single stage. It just makes life easier until you learn all of the basics and have some practice. The RCBS Rock Chucker is probably the standard for single stage loading presses.
But if he insists on a progressive right away or even if he can wait a bit, the Dillon RL 550B is probably the most bullet proof and comes with an incredible warrantee/guarantee. It isn't cheap but it will last a lifetime because Mike Dillon stands behind it forever.
RCBS make a great progressive, also, in the 2000 model. It's very well throught out and sturdy. There are others of course but these are the ones that I'm familiar with.
Best.
Dave
Riverviewsales.net
if that .50 is BMG he will need 2 presses. .50BMG is too large for a standard press. RCBS is a good choice.
gun control is not about guns, it is about CONTROL!
WRONG
http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=845765
I've got the Classic Cast. Great press but I haven't dont anything bigger than 7mm, I dont think you'll have any problem loading 50 BMG with it...it is a very sturdy press and easy on the wallet.
There is no pleasure in having nothing to do;the fun is having lots to do and not doing it.
.
It just isn't possible to compare the two presses since the Classic is made for the absolute lowest end of the reloading market. It's cheap and that's all it has going for it. The severe lack of quality means that it will have a short life span even with moderate usage. I know, I've tested these and most other presses for accuracy and sturdiness for years and Lee product usually have to be replaced with a higher frequency as do all cheap parts and tools.
The Lee products fill a niche, the very low end, when reloaders can't or won't afford higher quality tools. If that concept helps you get by, that's terrific, but please don't confuse cheap with being the best tool on the market. It can't happen and it's not true.
I had a lengthy reply all written and posted explaining my rationale but I just deleted it.
I don't care what you think or what opinion you have. You are entitled to those opinions as I'm entitled to mine. If Lee tools trip you trigger, then so be it. Enjoying the experience of reloading and shooting is what counts not the adversity of conflicting opinions.
If you managed to read the previous post before I deleted it, I apologize, it wasn't worthy of this site.
Best.
.
A dillon 650 is a great progressive to load handgun ammo with. Rifle ammo is hard work with a progressive press.
.
have good products that they stand behind if for some reason you
break a part 9 out of 10 times you just call them and the part is
sent to you free of charge
I love mine.