In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

vital bow gear rest

buckeyboybuckeyboy Member Posts: 5,833
I have this rest from vital bow gear. its called kaz away drop away rest holds arrow the whole 9 yard .. well saturday I cut my arrows shorter .. I like short arrows ask ben. So when I draw now the arrow comes inside the riser like an over draw .. Well guess waat my broadhead hits the riser... So I put the biscuit back on and tuned her up gonna stay with the biscut.

Ok now to the point I bought this rest new with the Mathews XT cost me 119.00 . I have seen them as low as 99.00 on flea bay .. Is anyone interested,,, The auction stars at 40 bucks.....[;)]72268214468080_01.jpg

Comments

  • Slash0311Slash0311 Member Posts: 1,676 ✭✭✭✭✭
    edited November -1
    Great offer, but I'm staying with my biscuit too![:D]
  • buckeyboybuckeyboy Member Posts: 5,833
    edited November -1
    If I hadent cut my arrows It was fine .. But I'm not springing for another doz.[;)]
  • taco413taco413 Member Posts: 2,504 ✭✭✭✭✭
    edited November -1
    quote:Originally posted by buckeyboy
    If I hadent cut my arrows It was fine .. But I'm not springing for another doz.[;)]



    Tight wad[:D]
  • hsracer201hsracer201 Member Posts: 966 ✭✭✭✭
    edited November -1
    thanks for the offer buckey, but i'm sticking with my Ultra-Rest
  • buckeyboybuckeyboy Member Posts: 5,833
    edited November -1
    quote:Originally posted by taco413
    quote:Originally posted by buckeyboy
    If I hadent cut my arrows It was fine .. But I'm not springing for another doz.[;)]



    Tight wad[:D] Buy the rest then I can buy some more arrow dick weed[:D]
  • taco413taco413 Member Posts: 2,504 ✭✭✭✭✭
    edited November -1
    quote:Originally posted by buckeyboy
    quote:Originally posted by taco413
    quote:Originally posted by buckeyboy
    If I hadent cut my arrows It was fine .. But I'm not springing for another doz.[;)]



    Tight wad[:D] Buy the rest then I can buy some more arrow dick weed[:D]




    I'm a lefty so it ain't gonna do me a bit of good, besides I have a Ripcord on mine. Further more if I had yer money i'd even buy my good ole pal taco a dozen arrows[:D]
  • buckeyboybuckeyboy Member Posts: 5,833
    edited November -1
    WELL I GUESS I WILL PUT IT ON GAY BAY.[;)]
  • taco413taco413 Member Posts: 2,504 ✭✭✭✭✭
    edited November -1
    quote:Originally posted by buckeyboy
    WELL I GUESS I WILL PUT IT ON GAY BAY.[;)]



    Ya don't have to yell ya damn yankee[:D]
  • bang250bang250 Member Posts: 8,021
    edited November -1
    He just wanted to say gay really loud.
  • buckeyboybuckeyboy Member Posts: 5,833
    edited November -1
    quote:Originally posted by taco413
    quote:Originally posted by buckeyboy
    WELL I GUESS I WILL PUT IT ON GAY BAY.[;)]



    Ya don't have to yell ya damn yankee[:D]
    What did you forget who won that war... redneck[:0][:D][:D]
  • buckeyboybuckeyboy Member Posts: 5,833
    edited November -1
    quote:Originally posted by bang250
    He just wanted to say gay really loud.

    [;)] No If I wanted to say Gay really loud I would Just yell


    SLASH
  • gogolengogolen Member Posts: 1,619 ✭✭✭✭✭
    edited November -1
    Buckey just a thought but did you try turning your arrow so that the cock feather is more out to the side allowing more clearance for the broadhead blade. Won't you have the same problem with your biscuit? Two arrows the same length=same spot on or behind your riser for your broadhead to land. This post is confusing to me, are you discarding the arrows you cut as well as the rest?
  • bang250bang250 Member Posts: 8,021
    edited November -1
    Rumor has it he shoots darts, not arrows.[:D]
  • taco413taco413 Member Posts: 2,504 ✭✭✭✭✭
    edited November -1
    quote:Originally posted by gogolen
    Buckey just a thought but did you try turning your arrow so that the cock feather is more out to the side allowing more clearance for the broadhead blade. Won't you have the same problem with your biscuit? Two arrows the same length=same spot on or behind your riser for your broadhead to land. This post is confusing to me, are you discarding the arrows you cut as well as the rest?


    That was a good point, I new a guy last year that had a similar problem with his ripcord. He eventually went to expandables to cure his problem. Hell buckey as short as those arrows were ya gave Ben you could keep 2 more inches and they'd still fly like darts.
  • buckeyboybuckeyboy Member Posts: 5,833
    edited November -1
    No gogo I am not discarding the arrows. They are shooting great with the biscuit with broadheads. I was able to get excellent flight moving the biscuit to the left about
    1/32 of an inch. when I did that with the drop away for some reason arrows were tail whipping terrible flight. being so close to the florida hunt I did not want to take any chances. I epoxy my heads on and they cannot be turned..... it's a nice rest but I like the biscuit better... I think this rest is better suited for 3d or target.. HMMMM ya interested[[:I]
  • DaBowMan18DaBowMan18 Member Posts: 2,962
    edited November -1
    quote:Originally posted by buckeyboy
    quote:Originally posted by bang250
    He just wanted to say gay really loud.

    [;)] No If I wanted to say Gay really loud I would Just yell


    SLASH
    lol[:D]
  • DaBowMan18DaBowMan18 Member Posts: 2,962
    edited November -1
    quote:Originally posted by buckeyboy

    I have this rest from vital bow gear. its called kaz away drop away rest holds arrow the whole 9 yard .. well saturday I cut my arrows shorter .. I like short arrows ask ben. So when I draw now the arrow comes inside the riser like an over draw .. Well guess waat my broadhead hits the riser... So I put the biscuit back on and tuned her up gonna stay with the biscut.

    Ok now to the point I bought this rest new with the Mathews XT cost me 119.00 . I have seen them as low as 99.00 on flea bay .. Is anyone interested,,, The auction stars at 40 bucks.....[;)]72268214468080_01.jpg
    i think i smell a giveaway........[;)][:p]
  • taco413taco413 Member Posts: 2,504 ✭✭✭✭✭
    edited November -1
    quote:Originally posted by DaBowMan18
    quote:Originally posted by buckeyboy


    i think i smell a giveaway........[;)][:p]



    Nah, that's just slash you smell[:D]
  • gogolengogolen Member Posts: 1,619 ✭✭✭✭✭
    edited November -1
    quote:buckeyboy Posted - 03/21/2006 : 2:50:14 PM
    No gogo I am not discarding the arrows. They are shooting great with the biscuit with broadheads. I was able to get excellent flight moving the biscuit to the left about
    1/32 of an inch. when I did that with the drop away for some reason arrows were tail whipping terrible flight. being so close to the florida hunt I did not want to take any chances. I epoxy my heads on and they cannot be turned..... it's a nice rest but I like the biscuit better... I think this rest is better suited for 3d or target.. HMMMM ya interested

    Thanks for the offer but I'll stick with my MPSI there isn't anything wrong with it. Have you paper tuned your bow with that biscuit kicked out like that? Something doesn't seem right. Oh and there are broadheads where as the ferul rotates on a shaft allowing you to gain the clearance you require.
  • DaBowMan18DaBowMan18 Member Posts: 2,962
    edited November -1
    quote:Originally posted by taco413
    quote:Originally posted by DaBowMan18
    quote:Originally posted by buckeyboy


    i think i smell a giveaway........[;)][:p]



    Nah, that's just slash you smell[:D]
    o. my bad [:D]
  • surekillsurekill Member Posts: 1,926 ✭✭✭✭✭
    edited November -1
    quote:Originally posted by buckeyboy

    I have this rest from vital bow gear. its called kaz away drop away rest holds arrow the whole 9 yard .. well saturday I cut my arrows shorter .. I like short arrows ask ben. So when I draw now the arrow comes inside the riser like an over draw .. Well guess waat my broadhead hits the riser... So I put the biscuit back on and tuned her up gonna stay with the biscut.

    Ok now to the point I bought this rest new with the Mathews XT cost me 119.00 . I have seen them as low as 99.00 on flea bay .. Is anyone interested,,, The auction stars at 40 bucks.....[;)]72268214468080_01.jpg


    You have all the paper work for it?
  • buckeyboybuckeyboy Member Posts: 5,833
    edited November -1
    I have the recipt when it was installed...
  • surekillsurekill Member Posts: 1,926 ✭✭✭✭✭
    edited November -1
    instruction?? manual? to it
  • buckeyboybuckeyboy Member Posts: 5,833
    edited November -1
    quote:Originally posted by surekill
    instruction?? manual? to it[:0] I think I tossed it but I can get I'm sure ya can get one.....
  • buckeyboybuckeyboy Member Posts: 5,833
    edited November -1
    quote:Originally posted by gogolen

    quote:buckeyboy Posted - 03/21/2006 : 2:50:14 PM
    No gogo I am not discarding the arrows. They are shooting great with the biscuit with broadheads. I was able to get excellent flight moving the biscuit to the left about
    1/32 of an inch. when I did that with the drop away for some reason arrows were tail whipping terrible flight. being so close to the florida hunt I did not want to take any chances. I epoxy my heads on and they cannot be turned..... it's a nice rest but I like the biscuit better... I think this rest is better suited for 3d or target.. HMMMM ya interested

    Thanks for the offer but I'll stick with my MPSI there isn't anything wrong with it. Have you paper tuned your bow with that biscuit kicked out like that? Something doesn't seem right. Oh and there are broadheads where as the ferul rotates on a shaft allowing you to gain the clearance you require.
    [;)][;)] GOGO I was able to heat up the epoxy and turn the broadheads. the flight is still good I took all new measurements and sep back up.... shooting real nice. I dont paper tune my bowsany more.
    i put on the luminok at dusk and watch my arrow flight nice and streight... hitting where I want... Thanks for the tip.[;)]
  • gogolengogolen Member Posts: 1,619 ✭✭✭✭✭
    edited November -1
    Glad I could help. So did you go back to the drop away then or the biscuit, I'm hungover and lost.
  • buckeyboybuckeyboy Member Posts: 5,833
    edited November -1
    quote:Originally posted by gogolen
    Glad I could help. So did you go back to the drop away then or the biscuit, I'm hungover and lost.
    Gonna stick with the biscuit. Ive had fantastic luck with them. hers my comparason the buscuit is the honda engine of bow rest . good reliable. durrable and very funtional at a good price,[;)]
  • DaBowMan18DaBowMan18 Member Posts: 2,962
    edited November -1
    quote:Originally posted by DaBowMan18
    quote:Originally posted by buckeyboy

    I have this rest from vital bow gear. its called kaz away drop away rest holds arrow the whole 9 yard .. well saturday I cut my arrows shorter .. I like short arrows ask ben. So when I draw now the arrow comes inside the riser like an over draw .. Well guess waat my broadhead hits the riser... So I put the biscuit back on and tuned her up gonna stay with the biscut.

    Ok now to the point I bought this rest new with the Mathews XT cost me 119.00 . I have seen them as low as 99.00 on flea bay .. Is anyone interested,,, The auction stars at 40 bucks.....[;)]72268214468080_01.jpg
    i think i smell a giveaway........[;)][:p]
    (cough..hint..cough)
  • surekillsurekill Member Posts: 1,926 ✭✭✭✭✭
    edited November -1
    It still wouldn't help a diamond bow(hint,hint)[:D]
  • DaBowMan18DaBowMan18 Member Posts: 2,962
    edited November -1
    quote:Originally posted by surekill
    It still wouldn't help a diamond bow(hint,hint)[:D]
    ya. well i dont need it for my superior diamond.....i would put it on my old PSE!!!!!!! the diamond has a NAP drop away rest....[:D]
  • surekillsurekill Member Posts: 1,926 ✭✭✭✭✭
    edited November -1
    quote:Originally posted by DaBowMan18
    quote:Originally posted by surekill
    It still wouldn't help a diamond bow(hint,hint)[:D]
    ya. well i dont need it for my superior diamond.....i would put it on my old PSE!!!!!!! the diamond has a NAP drop away rest....[:D]


    NAP thats what the deer woud do shooting a diamond at them
  • DaBowMan18DaBowMan18 Member Posts: 2,962
    edited November -1
    quote:Originally posted by surekill
    quote:Originally posted by DaBowMan18
    quote:Originally posted by surekill
    It still wouldn't help a diamond bow(hint,hint)[:D]
    ya. well i dont need it for my superior diamond.....i would put it on my old PSE!!!!!!! the diamond has a NAP drop away rest....[:D]


    NAP thats what the deer woud do shooting a diamond at them
    ya. because its so quiet ....... they would never hear it....[:D]
  • surekillsurekill Member Posts: 1,926 ✭✭✭✭✭
    edited November -1
    CHIT....give me a brake.lol
  • DaBowMan18DaBowMan18 Member Posts: 2,962
    edited November -1
    quote:Originally posted by surekill
    CHIT....give me a brake.lol
    its true.....[:D]
  • surekillsurekill Member Posts: 1,926 ✭✭✭✭✭
    edited November -1
    dream on little 1
  • DaBowMan18DaBowMan18 Member Posts: 2,962
    edited November -1
    quote:Originally posted by surekill
    dream on little 1
    nope. i know its true......
Sign In or Register to comment.