In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options
Santa Fe Jungle Carbine
tapwater
Member Posts: 10,335 ✭✭✭
..Along with an original, I have an Enfield Jungle Carbine built by Golden State/Santa Fe arms. I need a rear sight for the Santa Fe. It's different from the other Enfields. Any Ideas?...Thanks.
Comments
When Golden State Arms (the first one) made these they used both No 1 and No 4 style rifles. Originals were only made on the No 4 style action and the sight is only marked to 800 yards. Which style do you have.
..I'll have to dig it out and use a magnifier. It's just been taking
up space in the back of the safe. It's in very nice condition, unlike
the original that looks like it was stored in an Indian basement for
50 years.
..The right side is stamped as follows:
Enfield
1917
S-LE The dash could be MT, HT or NT.
III*
..It looks like the roll stamp was worn.
..Obviously, I don't know squat about British Enfields. Any help
would be much appreciated. Overall, the gun is in great condition. The wood and steel are near flawless. Just need a rear sight!
This is what I have on mine. I don't think it is a Santa Fe one though at least it isn't marked as such. I think Santa Fe took any old Enfields they could find and converted them. You may have to try and figure out what yours originally was and go from there.
Also I noticed that there were people on other boards looking for them as well. Are you on any of those other boards???
[img][/img]
Okay so I let you talk me into taking my scope off so I could give you a better picture of what I have.
[img][/img]
..Mine doesn't have those "humps" where your rear sight is mounted.
I have pics but I just can't find them and I haven't figured out how to get them from a new camera to the computer.
Another place you could try is Springfield Sporters in PA. I think their still in business and they used to stock a ton of Enfield parts.
[img][/img]
..I tried Hoosier and I'll check elsewhere. If I need your help, is it okay to contact you through GB? Thanks again.
.Thanks much Curt. I appreciate you looking into it. If I can manage to get the pics from camera to computer to Photobucket it would be helpful. The old camera was no problem. Your pics were helpful in that I can see the vastly different shaped receivers.
..I tried Hoosier and I'll check elsewhere. If I need your help, is it okay to contact you through GB? Thanks again.
Sure no problem if I can find out any more I'll get back to you. It would probably help a whole lot more if you can figure out your camera/computer, it shouldn't be to difficult.
What you have is not an original Jungle Carbine but one made up by Golden State Arms from much older guns. It will not accept the correct Jungle Carbine rear sight...
..Yes, I know that. Being a "mocked up" one makes it harder to
find the one that would fit. If you can decipher the markings
I said were on the receiver, knowing what it was built on may
be of help.
..No it shouldn't be hard but I'm computer-illiterate. Old camera had a cord--plug it in and follow the prompts. I'll get one of my sons over to give me a hand.
If this helps don't know if you have this type of set up but my camera uses a memory card that I put into a slot in my printer. I go into my control panel on the computer and download it into my computer and then it goes to paint and then the file (picture) is saved.