In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
More about our 416 HSM from BMG brass, and
our 416 HE & 460 HE from our 585 HE cases
Got reamers for 375 HE, 416 HE and 416 HSM,....
460 HE & 460 HSM are all spec'd, got HE reamer
soon have HSM reamer...Our HSMs have a Wea type
radius on the shoulder..
The fellow that set up our 416 HE in an ELR rifle
and got 1/4 min accuracy,
They got some game out west over 1400 yds..
.Here is the gun they set up.
Using a K&P 34" barrel on a BAT action.....Ed
Comments
for ELR , rebarrel to 416 and use our 416 HSM, 500 gr bullet ....
.Here is up north guy using 585 HE in a PTRD with inserts,
Light load.....Inserts are in the shape of the 14.5mm case....
HERE ia video, 585 Hubel Express and water jugs - slow motion
750 gr with 155gr RE17, just a moderate load.....Ed
the sides made too thick...They have thinner sides
than smaller cases guys are getting that have the sides
made too thick and won't extract easy or work with high pressures.
Here Barnard P Cheytac bolt that would do for our 416 HSM..Ed......
One just built a 416 HE, just been testing it a few days..
And using 168gr of HBMG 475 gr CEB, tested it, in good
conditions, 2 shots at 1800 yards and was within
a 1/4 of minute accuracy...A few shots at shorter ranges
had same accuracy. Ed..
our 416 HE & 460 HE from our 585 HE cases
Got reamers for 375 HE, 416 HE and 416 HSM,....
460 HE & 460 HSM are all spec'd, got HE reamer
soon have HSM reamer...Our HSMs have a Wea type
radius on the shoulder..
The fellow that set up our 416 HE in an ELR rifle
and got 1/4 min accuracy,
They got some game out west over 1400 yds..
.Here is the gun they set up.
Using a K&P 34" barrel on a BAT action.....Ed
asking about one and new great line of 458 bullets CEB now has.
It will hold more powder than the 416 HSM and will get
a 572 gr as fast as 416 HSM gets a 475gr.....Ed..
416 & 460 HE AND 416 & 460 HSM .LONG RANGE AND HUNTING
Can be set up in Pierce X10 ACTION for the 416 & 460 HE
AND X20 action for the 416 & 460 HSM , Can get those
if guys need one...Ed
Here is picture of my 416 HSM test gun,... It is a big falling block we had
as a 8 bore years ago. Has a 34 inch , 1 5/8 "diameter, 1 to 10 twist barrel. .. Ed.
[img]http://www.gunownerstv.com/hsmfb.jpg[/img]
The link to the picture doesn't seem to work.
http://www,gunownerstv,com/hsmfb.jpg