In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options
Loose primers
wiz1997
Member Posts: 1,051 ✭✭
Have some fired once French Military 7.62 cases. I know once fired because the crimp was still there. After processing the brass and then seating the new primers I noticed the primers are loose in the pocket. If I blow into the case the primer moves so I believe these are way too loose. Pretty sure I should not finish reloading these but what about the ones I already put the primer in? Carefully decap and then save the primers for some other case? Scrap the cases or try a different package of primers? I have reloaded some of these same cases with the same size of primer without this problem.
Primers are CCI200.
Primers are CCI200.
Comments
email @ rrhogueiii@aol.com or 701-730-5161.
I'd toss the cases.
Supergluing in the primers would likely be ok for light cast loads but I wouldn't want to try it for anything hotter.