In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options
A little help please
jmaustin
Member Posts: 5 ✭✭
New to the site as you can tell by my join date. I am also sort of newbie to gun info/history, but thought this would be the best place to start. I ran across the following at an antique/junk sale and had some value and/or "what are they" questions.
Again, please forgive the pics and info as I am new to this and was not really prepared with a good camera or what to look for and/or ask. The info I do have may be very broad but anything you know will help.
Here is what I know:
Gun 1: J Stevens SXS http://www.flickr.com/photos/jon_mckee/sets/72157622487853532/
From what I could find on the net it should be pre 1940 since the inscripted name said J Stevens Arms Company, but I have not found any of these on GB or other sites with the same insignia on the side (last pic). I did not see any other markings, but did not open it up to look under the barrels.
Gun 2: Unknown
http://www.flickr.com/photos/jon_mckee/sets/72157622363255565/
As you can see in the photos, made in Brazil; Serial# (I assume) 700370; Not sure on the insignia. ERA?
Gun 3: Unknown
No Pics. It was an old SXS w/ hammers, no visible markings and the latch to open it was on the bottom which I hadn't seen. It had a large latch to break it open and a smaller latch mounted under the larger to break it completely.
The seller's story was that it was made in Belgium used in WW_ and in poor condition b/c it was pulled out of one of the gun piles that they had run over with tanks after the war.
Thanks,
Again, please forgive the pics and info as I am new to this and was not really prepared with a good camera or what to look for and/or ask. The info I do have may be very broad but anything you know will help.
Here is what I know:
Gun 1: J Stevens SXS http://www.flickr.com/photos/jon_mckee/sets/72157622487853532/
From what I could find on the net it should be pre 1940 since the inscripted name said J Stevens Arms Company, but I have not found any of these on GB or other sites with the same insignia on the side (last pic). I did not see any other markings, but did not open it up to look under the barrels.
Gun 2: Unknown
http://www.flickr.com/photos/jon_mckee/sets/72157622363255565/
As you can see in the photos, made in Brazil; Serial# (I assume) 700370; Not sure on the insignia. ERA?
Gun 3: Unknown
No Pics. It was an old SXS w/ hammers, no visible markings and the latch to open it was on the bottom which I hadn't seen. It had a large latch to break it open and a smaller latch mounted under the larger to break it completely.
The seller's story was that it was made in Belgium used in WW_ and in poor condition b/c it was pulled out of one of the gun piles that they had run over with tanks after the war.
Thanks,
Comments
Found this place with parts but I think they are a re-make
http://www.brownells.com/.aspx/pid=862/Product/SIGHT_APERTURES
And this one too
http://www.brownells.com/.aspx/sid=3228/sku/3_8__x__050__Aperture
Thank you for your help I tried to figure it out for myself. This is all very new to me. I gave up racing vintage motocross (Hurt to many times) and decided to shoot in the 22 cal. matches they have going on around here in the Seattle area.
DGRM125
I'd pass on the three you listed.
I am definitely going to keep studying, but ran across these and was wondering if they might be a good starting block.
I could get the first two for $125 per. The seller of the third said he had it appraised for $500-$600, but since he couldn't show me anything i'm sure that is a mint price. He had a sticker of $275, but I could work him down to 200-225. Especially with the amount of work it needed (All parts were there and in tact, but definitely not in shot-able condition). I assumed these may be pretty plain jane, but you got to start somewhere.
I'm not much impressed with the low grade Brazilian guns. All of them I've seen weren't worth the effort to pound them down for tomato stakes.
The Belgian might have been a possibility had it been in good enough condition dependent on the makers marks.
I personally would try to steer beginning shooters away from the under lever guns. They tend to have short chambers and will not withstand the pressures generated by modern ammo. Factory loaded low pressure ammo is available, but very few companies make it. I personally roll my own for my Husqvarna Model 20.
They are interesting guns and are a joy to shoot, but they must be in top mechanical condition with barrels tight on face and fed proper ammunition.
From your description it would look like this Husqvarna. Correct?
http://v4.beta.gunbroker.com/Auction/ViewItem.aspx?Item=141603054
Good luck in your search. The hunt is half the fun.
Your link looks to be right on with the Belgian, but yes, the condition was a shame. I almost laughed out loud when the guy told me "it would probably fire, but I wouldn't recommend it."
Thanks and may the search and learning continue.