In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options
Year of Manufacture
seb1999
Member Posts: 343 ✭✭✭
I am trying to find out the year of manufacture of my Webley & Scott 12 gauge 3" chamber single. I now know that it is a quality trap gun with an extreme full choke and that the original monte carlo cheek piece has been removed fron the english stock.
Webley & Scott was purchased by Holland & Holland and now they only make airguns and state clearly on their web site they cannot supply any info on firearms.
Do you think I could get this info by writing to Holland & Holland or are they above supplying this information? The address I have is:
Holland & Holland
31-33 Bruton Street
LONDON
W1X 8JS
Has anyone here written to them or needed info and got it? Was there an individual that you wrote to or received it from?
Captain K if this should not be here please lock the topic and I will ask in the other forum.
I should have stated the sn. no. is 721xx
Webley & Scott was purchased by Holland & Holland and now they only make airguns and state clearly on their web site they cannot supply any info on firearms.
Do you think I could get this info by writing to Holland & Holland or are they above supplying this information? The address I have is:
Holland & Holland
31-33 Bruton Street
LONDON
W1X 8JS
Has anyone here written to them or needed info and got it? Was there an individual that you wrote to or received it from?
Captain K if this should not be here please lock the topic and I will ask in the other forum.
I should have stated the sn. no. is 721xx
Comments
I KNOW I CAN GET A HISTORY FROM S&W BUT I ONLY WANT TO KNOW THE YEAR.
ANY HELP YOU CAN PROVIDE WILL BE APPRECIATED.
Captain Kirk, Tech Staff
http://gunshop.com/dgsnos5.htm
The firearm is chambered 3" 12 Gauge and I do not think this caliber was made until around 1935 by Winchester ( I am not an authority on ammo so I may be off a few years) and it is narked Webley & Scott, Birmingham and I think that table may be applicable to W.C Scott firearms the precursor to Webley & Scott, Birmingham.
Anyway the search goes on!
In your post you note the stock has been reworked, sometime in the past.
If I was a betting man I'ld be willing to wager that you shotgun had been rechambered at the same time.
And if it originally left the factory purposely built as a "Trap Gun" was chambered for 2 3/4" or shorter shells.
The barrel is marked 3" 3 1/2 Tons per square (and the square is a square!!) inch with the appropriate British proof marks and the inch is the symbol " the barrel has not been reworked!!!
The barrel is sn marked, the receiver is marked the same as is the forestock and the butt stock. The receiver is a beautiful case hardened finish with lots of color. The butt plate is marked Webley.
I have owned this gun since 1962 when I purchased it used at the age of 18 at which time I was a resident of Ontario, Canada.
I have had email from England and the sender said that he had never heard of a Webley & Scott single but that since I owned one he had to admit that one did exist.
The local authority here in Myrtle Beach, SC first said that it was a Rook Rifle and has since said that in his opinion it was a trap gun, probably a custom job but he wanted to hear from Holland & Holland and I was pleasantly surprised at his valuation.
I thought I might be able to accelerate the process here on Gunbroker.
From what I understand Winchester started to manufacture 3" 12 gauge shotshells in the early to mid thirties.
As I sid previously the search goes on!!!
Given this wasn't the practice prior to 1925, I still don't believe your shotgun originally left the W & S factory chambered for 3" shells, given it's apparent age.
The easiest way to settle this is the proof marks on the shotgun,
guns that were sent back for repair or rework were marked with a "CROWN over R" proof. Does your shotgun have this proof?
If your "LOCAL AUTHORITY" in Myrtle Beach doesn't know the difference between a Rook Rifle and a 12 Gauge Shotgun any confidence I would have in him regarding the identification and appraisal of firearms would be severely shaken.
.729" then under a crown B\P the backward slash mark has an upward mark almost making it look like a lopsided V the number 12 in a diamond then 3" then below that 3 1/2 TONS per than a small square and then "
The portion that fits in the receiver at the bottom of the barrel is 721xx and the portion that goes in the forestock is marked 2xx as it is little more than a half an inch long.
What does everyone think?