In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options
.380 out of a 9mm revolver
jthoresen
Member Posts: 445 ✭✭✭
Can I shoot .380 out of a 9mm revolver? I know .380 is more expensive but my wife doesn't like the recoil of the Taurus 9mm 905 revolver. It's sharper than a 38 special in the same gun. I think she would practice more if the round was a little lighter.
I also have a S&W 610 10mm revolver that I commonly shoot 40S&W out of. I'm guessing I could but want to ask.
I also have a S&W 610 10mm revolver that I commonly shoot 40S&W out of. I'm guessing I could but want to ask.
Comments
I wouldn't shoot 380's out of a 9mm. The 9mm is heavily tapered, and the 380 isn't, it would probably work, but the chance of a ruptured case would be pretty high.
Trying it could be dangerous because of headspace problems.
.380 cases will not stay in the 9mm moon clip
case neck diameter of the .380 is smaller - resulting in possible over exansion into the 9mm cylinder chambers - resulting in stuck cartridges or possibly split cartridges.
See below for cartridge specifications.
One possible solution would be to get ahold of some of the 100 gr. 9x19mm low recoil cartridges and let your wife try them in your revolver. Good luck!
9x19mm/Luger/Parabellum Specifications
Parent case 7.65x22mm Parabellum
Case type Rimless, straight
Bullet diameter 9. mm (0.35 in)
Neck diameter 9.65 mm (0.380 in)
Base diameter 9.93 mm (0.391 in)
Rim diameter 9.96 mm (0.392 in)
Case length 19.15 mm (0.754 in)
Overall length 29.69 mm (1.169 in)
Primer type Small pistol
.380ACP, 9mm Browning/Kurtz/Corto Specifications
Case type Rimless, straight
Bullet diameter .355 in (9.0 mm)
Neck diameter .373 in (9.5 mm)
Base diameter .374 in (9.5 mm)
Rim diameter .374 in (9.5 mm)
Rim thickness .045 in (1.1 mm)
Case length .680 in (17.3 mm)
Overall length .984 in (25.0 mm)
Also might consider buying her a PAST glove for her shooting hand, or installing some cushiony Hogue grips to soak up some of the sting.
It may be psychological, but try her out with an oversized pair of shooting glasses; my ex used to flinch and complain a lot because she was afraid of the shock wave coming back at her face.
quote:Originally posted by gunnut505
Let her practice with lower velocity (subsonic) 9mm rounds; there's no reason to endanger her just because she doesn't like the recoil.
Also might consider buying her a PAST glove for her shooting hand, or installing some cushiony Hogue grips to soak up some of the sting.
It may be psychological, but try her out with an oversized pair of shooting glasses; my ex used to flinch and complain a lot because she was afraid of the shock wave coming back at her face.
I'm not sure the former would help. Subsonic 9mm rounds use heavy 147 grain bullets and in my experience the recoil isn't really reduced. The lower REPORT (ie "bang") might be helpful, though.
The latter are good ideas. 9mm from a snubnose can be pretty hard recoil wise. People love to bash the 9mm round, but it puts out energy somewhere in between the usual .38+P and .357 magnum. Its a lot of power coming from a snubnose.
I've found that changing out the two finger "boot" grips to full three finger grips makes a *huge* difference in perceived recoil, and I think that would be a good way to go.