In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options
Colt Commando pistol question
204targetman
Member Posts: 3,493
I have a Colt Commando .38 special pistol. When I type the serial number in on the bottom of the frame, under the grips on the serial number look up site. It says 1942 Colt Commando. The serial number you see when you open the cylinder says 1941 Official Police Model (continued army special serials). From what I understand the commando was just an official police model pulled off the line, and had a different finish. And that some of the parts where interchanged. Would my pistol be considered a mis-matched parts gun. Or was this commonplace with this model.
Comments
If you have two different serial numbers on the frame, it would be quite unusual.
The Smith & Wesson "Victory Model" revolvers, which were made in much greater quantity during the war. Were serial numbered on the bottom of the frame.
The Victory Model Smiths, I referred to earlier. Had multiple serial numbers. But they were the same, and located on different individual parts.
Serial number on the frame is in the 10,000 range. I read that it wasn't uncommon for this to happen. They used official police parts to complete the commandos. And like I said. if you search the serial number on the crane. it comes back as an official police model. But in parenthesis says continued army special serials. I wonder if it would be beneficial to get a letter from colt. Its not a mint condition pistol. But is very interesting. They only made a little over 50,000 of these. My guess is when mine was made. they were still using left over parts from the official police models. and was just using what they had to put a revolver together.
Wouldn't have thought, it would have been in the 10.000 range. With two entirely different serial numbers, on the frame. Must have been a OP frame, that was forgotten about at the bottom of the parts bin.
My take on you Colt, is that potentially. It would be of great interest to a Colt collector. And have substantial value. Getting a Colt letter, would only enhance the value.
quote:Originally posted by 204targetman
Serial number on the frame is in the 10,000 range. I read that it wasn't uncommon for this to happen. They used official police parts to complete the commandos. And like I said. if you search the serial number on the crane. it comes back as an official police model. But in parenthesis says continued army special serials. I wonder if it would be beneficial to get a letter from colt. Its not a mint condition pistol. But is very interesting. They only made a little over 50,000 of these. My guess is when mine was made. they were still using left over parts from the official police models. and was just using what they had to put a revolver together.
Wouldn't have thought, it would have been in the 10.000 range. With two entirely different serial numbers, on the frame. Must have been a OP frame, that was forgotten about at the bottom of the parts bin.
My take on you Colt, is that potentially. It would be of great interest to a Colt collector. And have substantial value. Getting a Colt letter, would only enhance the value.
Thanks for the comments. Its just kind of an odd pistol all the way around. Like I said earlier. Its definitely not a mint example. Its been shot some. Actually has a very good action. The double action trigger is very smooth. And has a very crisp break in single action mode. I think I will do the Colt letter. Ill keep trying to figure it out. And I agree with what you said about the serial number. I would have thought if parts would have been interchanged. It would have been with very low serial number guns.